Is it time for your house to get a new roof? You will assume that’s everything you need for a new roof if your house has shingles on it. Uh, not so! There is far more to it than having a roof that is water-tight. When implementing new roofs, roofing companies use many different products. Langhorne Roofing¬†offers excellent info on this.

Old roofs are usually recommended to be taken off before the fresh ones are added. Special serrated shovels are only made to break away the rusty shingles. You’ve got to make sure you also have the old nails down. The serrated style allows the nails to be grabbed and extracted.

Substitute any Rotting Wood or Decaying Wood

You may need to carefully check the roof for any rotting or rotten timber until the roof is ripped off. You have to repair the plywood or sheeting boards where there are any poor places. You’ll need a decent cutting saw and nails to bring down the fresh wood.

Apply the Felt or Underlay Roofing

Your next move is to put down the underlaying until the roof is nice and clean and any bad wood is replaced. Felt underlay is typically used with 15 to 30 pounds of weight. For added security, you would want to double this in the valleys. For adding the felt, a hand tacker can be needed.

Application Shingle

The shingle application is next if the felt is over the roof deck. You may require special roofing nails to apply them. Compressors and nail weapons are utilized for this by certain persons and nearly all roofing contractors. But certain old-fashioned roofers who use a roofing hatchet and do it by hand are always there.

Basic Roof Safety – Three Tab Shingles –

For your residential roofing, there are many different styles of shingles you may use. It is very common to have three tab shingles and several roofs have these. It is a decent simple shingle which will cover your roof and house.

Shingles of architecture with a three-dimensional look

Today, residential shingles are seen more and more. Due to their three dimensional appearance, they are often called dimensional shingles. They come with a large spectrum of shades. There are also numerous models with varying weights and different warranties from the maker.

Flashing Chimney

If some of the flashing metal on the roof is wearing down, you may still need to repair it. Normally, the chimney flashing is a first layer of stage flashing that is woven through the shingle courses and the chimney side. It might be enough to seal it with roofing cement if the flash is already in decent condition.

Cement Roofing for Sealing Stuff Up

Roofing cement is used to cover chimneys, vents and other protrusions of the roof surrounding them. It is available in multiple container types, such as buckets or tubing. To add the roof cement, a putty knife, trowel, or caulking gun may both be required.